- Home
- ยป
- Our Products
- »
- Relative Humidity and Temperature Transmitters
Relative Humidity and Temperature Transmitters
SC807 Temperature & Humidity Transmitter
Product Brochure
Model Name/Number | SC807 |
Model Number | SC807 |
Mounting Type | Surface / Wall / Duct |
Power Supply (V) | 4.5~32 V DC |
Type | Transmitter |
Brand | Radix |
Condition | New |
Country of Origin | Made in India |
- 2 x 4~20 mA outputs
- Software calibration - no trimpots
- True 2-wire operation
- 4.5~32 V DC loop supply
- Accuracy : ± 2% RH, ± 0.5 °C
- PC programmable
Additional Information:
- Port of Dispatch: Mumbai, India
Humidity and Temperature Transmitter
Product Brochure
Model Name/Number | TX7DR |
Brand | Radix |
Accuracy | +- 2% RH, +- 0.3 DegreeC |
Depth | 55mm |
Height | 85mm |
Rated Supply Voltage | 11.5 - 32 V |
Width | 120mm |
Output Type | mA |
Country of Origin | Made in India |
- 2 x isolated 4~20 mA outputs
- True 2-wire operation
- Accuracy : ± 2% RH, ± 0.3 °C
- Software calibration - no trimpots
- Upscale/downscale selection
- 11.5~32 V DC loop supply
- 4~20 mA or 20~4 mA selection
- Dual 4-digit LED display enhances utility
Additional Information:
- Item Code: SeriesRHP
RH+T Transmitter with Remote/ Integral Sensor
Product Brochure
Usage/Application | Clean room monitoring, HVAC/building monitoring, Green house monitoring, Process system monitoring |
Model Name/Number | SC807 |
Brand | Radix |
Voltage | 4.5 ~ 32 V DC |
Accuracy | +- 2% RH, +- 0.5 DegreeC |
Operating Range | -20 to +50 DegreeC |
Protection Type | IP65, except sensor tube |
Country of Origin | Made in India |
Input | RH & Temperature Sensor |
- 2 analog outputs with true 2-wire operation
- Accuracy ± 2 % RH, ± 0.5 ºC for band gap
- Any output can be assigned to RH, T n The loop drop of 4.5 V is the lowest among such products
- Both outputs are isolated from each other
- Parameter configuration via PC configurator using USB to Serial Converter DCC501
- For flameproof version, the heavy-duty metal tube construction and IP66 protection allows use in rough industrial environments
- n Replaceable wall mount, duct mount or remote RH+T sensor option available
- Remote sensor option can be used where space is limited
- Long term stability of RH+T sensor
- Protected solder pads of sensor for anti corrosion
- Sensor is condensation resistant
- Sintered bronze filter cap, stainless steel or wiremesh option
Humidity RH and Temperature Transmitter
Product Brochure
Minimum Order Quantity | 1 Piece |
Model | SC806 |
Brand | Radix |
- SC806 is a high-performance 2-wire Temperature (RH+T) and Relative Humidity Transmitter for use in hazardous environments.
- It is factory configured for two relative humidity outputs (2 x RH), two temperature outputs (2 x T), or one output each for relative humidity and temperature (1xRH + 1xT).
- With its integral relative humidity and temperature sensor, the transmitter is inside a duct-mounted flameproof (certified for gas groups I, IIA, IIB) enclosure with an IP66 rating; completely dust proof and can withstand temporary flooding.
- This transmitter is accurate to 2% for relative humidity and within 0.3 °C for temperature. SC806’s micro controller technology linearizes the input which makes control more effective.
- It is powered by a 4.5 - 32 V DC loop supply and has a loop drop of no more than 4.5V, which is remarkably low amongst such products.
- This product features Radix's proprietary sensor-break indication technology.
Specifications:
- True 2-wire operation
- Accuracy : ± 2% RH, ± 0.3° C
- 2 x 4-20 mA outputs
- IP66, rugged construction
- Duct mount
- Software calibration - no trim pots
- 4.5-32 V DC loop supply
- Sensor break indication
Additional Information:
- Item Code: SC806
Humidity & Temperature Transmitter
Product Brochure
Model Name/Number | SC807 |
Accuracy | +- 2% RH, +- 0.5 DegreeC |
Measuring Parameter | Relative Humidity & Temperature |
Output Value | 2 x 4~20 mA |
Model Number | SC807 |
Mounting Type | Surface / Wall / Duct |
Power Supply (V) | 4.5~32 V DC |
Type | Transmitter |
Brand | Radix |
Input Value | SC807 |
Condition | New |
- SC807 is a microcontroller based, high performance 2-wire RH+T transmitter
- It can be factory configured for 2 x RH outputs, 2 x Temperature outputs, or 1 x RH + 1 x T output
- Its high reliability industrial design offers some unique functions
- The loop drop of 4.5 V is the lowest amongst such products
- The RH+T transmitter is available in surface mount, duct mount and remote sensor versions
- It is PC programmable using PC Configurator PCC82
Additional Information:
- Port of Dispatch: Mumbai, India
High Temperature Humidity Transmitter
Product Brochure
Model Name/Number | HTE201 |
Brand | Radix |
Operating Range | 5~50 DegreeC (23~122 DegreeF) with display |
Accuracy | RH: +- 2% RH, +- 3% RH, Temp: +- 0.2 DegreeC for RTD, Dewpoint: +-1 DegreeC |
Measuring Parameter | RH, Temperature & Dewpoint |
Usage/Application | Commercial Buildings, Greenhouses, Swimming Halls, Cooling Chambers, Air Economizers |
Color | White |
Protection Type | IP30 |
Response Time | RH : 8 seconds for t 63%, T : 5 to 30 seconds for t 63% |
Storage Temperature | -20~70 DegreeC (-4~158 DegreeF) with display |
Input Sensor | Smart RH Sensor and RTD |
Sensor Output | RTD Sensors and Various Thermistors |
Country of Origin | Made in India |
Material | Polycarbonate |
- 2 x 2-wire, 4~20 mA or 0~10V DC outputs with RTD resistance output option
- Any or both outputs can be assigned to RH or T or Dewpoint or specific derived physical quantity
- RH & T range selection, parameter configuration and calibration [with USB to Serial Converter (DCC501), Handheld Configurator (HHC202), Inbuilt LCD & 3 Keys]
- Health / status (Heartbeat) LED
- Calculated physical quantities (Dewpoint, Absolute Humidity, Heat Index, Enthalpy & Air Density)
- Isolated RS485 / MODBUS RTU or BACnet MS/TP
- Replaceable RH+T sensor
- Convenient installation with 2-part housing with fixed back and removable electronics
- Stylish housing with vents for air flow across sensor for better accuracy
Remote Temperature & Humidity Transmitters
Product Brochure
Model Name/Number | HTE201 |
Brand | Radix |
Operating Range | 5~50 DegreeC (23~122 DegreeF) with display |
Accuracy | RH: +- 2% RH, +- 3% RH, Temp: +- 0.2 DegreeC for RTD, Dewpoint: +-1 DegreeC |
Measuring Parameter | RH, Temperature & Dewpoint |
Usage/Application | Commercial Buildings, Greenhouses, Swimming Halls, Cooling Chambers, Air Economizers |
Color | White |
Protection Type | IP30 |
Response Time | RH : 8 seconds for t 63%, T : 5 to 30 seconds for t 63% |
Storage Temperature | -20~70 DegreeC (-4~158 DegreeF) with display |
Input Sensor | Smart RH Sensor and RTD |
Sensor Output | RTD Sensors and Various Thermistors |
Country of Origin | Made in India |
Material | Polycarbonate |
-
2 x 2-wire, 4~20 mA or 0~10V DC outputs with RTD resistance output option
-
Any or both outputs can be assigned to RH or T or Dewpoint or specific derived physical quantity
-
RH & T range selection, parameter configuration and calibration [with USB to Serial Converter (DCC501), Handheld Configurator (HHC202), Inbuilt LCD & 3 Keys]
-
Health / status (Heartbeat) LED
-
Calculated physical quantities (Dewpoint, Absolute Humidity, Heat Index, Enthalpy & Air Density)
-
Isolated RS485 / MODBUS RTU or BACnet MS/TP
-
Replaceable RH+T sensor
-
Convenient installation with 2-part housing with fixed back and removable electronics
-
Stylish housing with vents for air flow across sensor for better accuracy
Temperature & Humidity Transmitter HTE201
Product Brochure
Model Name/Number | HTE201 |
Brand | Radix |
Operating Range | 5~50 DegreeC (23~122 DegreeF) with display |
Accuracy | RH: +- 2% RH, +- 3% RH, Temp: +- 0.2 DegreeC for RTD, Dewpoint: +-1 DegreeC |
Measuring Parameter | RH, Temperature & Dewpoint |
Usage/Application | Commercial Buildings, Greenhouses, Swimming Halls, Cooling Chambers, Air Economizers |
Color | White |
Protection Type | IP30 |
Response Time | RH : 8 seconds for t 63%, T : 5 to 30 seconds for t 63% |
Storage Temperature | -20~70 DegreeC (-4~158 DegreeF) with display |
Input Sensor | Smart RH Sensor and RTD |
Sensor Output | RTD Sensors and Various Thermistors |
Country of Origin | Made in India |
Material | Polycarbonate |
-
2 x 2-wire, 4~20 mA or 0~10V DC outputs with RTD resistance output option
-
Any or both outputs can be assigned to RH or T or Dewpoint or specific derived physical quantity
-
RH & T range selection, parameter configuration and calibration [with USB to Serial Converter (DCC501), Handheld Configurator (HHC202), Inbuilt LCD & 3 Keys]
-
Health / status (Heartbeat) LED
-
Calculated physical quantities (Dewpoint, Absolute Humidity, Heat Index, Enthalpy & Air Density)
-
Isolated RS485 / MODBUS RTU or BACnet MS/TP
-
Replaceable RH+T sensor
-
Convenient installation with 2-part housing with fixed back and removable electronics
-
Stylish housing with vents for air flow across sensor for better accuracy
2 Wire RH & T Transmitter
Product Brochure
Model Name/Number | SC804 |
Measuring Parameter | Relative Humidity & Temperature |
Usage/Application | Industrial |
Display Type | Dual row LCD display |
Mounting Type | Wall / Duct |
Protection Type | IP66 as per IS/IEC:60529-2009 |
Power Supply (V) | 11.5~32 V DC loop supply |
Type | Transmitter |
Brand | Radix |
Condition | New |
Country of Origin | Made in India |
Model | SC804 |
- Highly accurate RH + T measurement
- Dual row display
- RTD Pt100/Pt1000 temperature measurement option available
- User Programmable Range & Unit
Additional Information:
- Item Code: SC804flameproof
- Port of Dispatch: Mumbai, India
HUMIDITY / TEMPERATURE / DEWPOINT TRANSMITTER
Product Brochure
Model Name/Number | SC804 |
Brand | Radix |
Measuring Parameter | RH, Temperature and Dewpoint |
Usage/Application | Industrial |
Ingress Protection | IP66 as per IS/IEC:60529-2009 |
Input Sensor | Smart sensor for RH and/or temperature |
Country of Origin | Made in India |
Model | SC804 |
Mounting Type | Wall / Duct |
SC804 accurately measures humidity using capacitive sensor technology & temperature using band gap sensor technology or RTD. It gives one or two, 2-wire, loop powered outputs, or 0~10V DC outputs that can be assigned to RH, T or Dewpoint using handheld configurator or PC based configurator. Temperature output can be analog output or resistance output from Class A RTD, Pt100 or Pt1000.
Additional Information:
- Item Code: SC804
- Port of Dispatch: Mumbai, India
Wall Mount Humidity Transmitter
Minimum Order Quantity | 1 Piece |
Dimension | Standard |
Brand | Radix |
With its integral relative humidity and temperature sensor, the transmitter is inside a surface-mounted flameproof (certified for gas groups I, IIA, IIB and IIC) enclosure with an IP65 rating; completely dust proof and a good level of protection against water. Remote external sensors, SHT20, SHT30 (wall-mount) and SHT40 (duct-mount) may be placed as far as 25 meters from the unit. TX7DR has a dual LED display visible through the enclosure; the upper indicates relative humidity and the lower indicates temperature.The operator calibrates Zero and Span for TX7DR on the front of the unit via membrane keys. This transmitter is accurate to 2% for relative humidity and within 0.3° C for temperature. SC804 transmits two isolated output signals to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). Signal isolation protects your devices & machines downstream of our instruments from damaging fluctuations in the input signal. TX7DR’s micro controller technology linearizes the input which makes control more effective. It is powered by a 11.5 - 32 V DC loop supply. This product features Radix's proprietary sensor-break indication technology.
Specifications:
- 2 x isolated 4-20 mA outputs
- 4-20 mA or 20-4 mA selection
- Software calibration - no trim pots
- Upscale/downscale selection
- 11.5-32 V DC loop supply.
- True 2-wire operation
- Accuracy : ± 2% RH, ± 0.3 °C
- Dual 4-digit LED display enhances utility
Additional Information:
- Item Code: TX7DR
Humidity Transmitter
Minimum Order Quantity | 1 Piece |
Dimension | Standard |
SC805 is a high performance Temperature (RH+T) Transmitter and 2-wire Relative Humidity. Its relative humidity and temperature transmitter is available in surface mount, duct mount and remote sensor versions. Remote external sensors, SHT20, SHT30 (wall-mount) & SHT40 (duct-mount) may be placed as far as 25 meters from the unit. SC805 has a dual LCD display; the first line indicates relative humidity % and the second, the temperature in °C. The transmitter is accurate to 2% for relative humidity and within 0.3 °C for temperature. SC805 transmits two isolated 4-20 mA retransmission outputs to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). SC805’s micro controller technology linearizes the input which makes control more effective. It is powered by a 4.5 - 32 V DC loop supply and has a loop drop of no more than 4.5V, which is remarkably low amongst such products. The RH+T transmitter is user programmable by a PC, connected via PCC82, a PC configurator by Radix.
Features
- True 2-wire operation
- Accuracy: ± 2% RH, ± 0.5° C
- 2 x 4-20 mA outputs
- PC programmable
- SC805 - Surface / Wall / Duct Mount, LCD Display
- Software calibration - no trim pots
- 4.5-32 V DC loop supply
- Dual 7-segment LCD display to show RH and T
Additional Information:
- Item Code: SC805