Relative Humidity and Temperature Indicator and Controller

Product Price :Get Latest Price

RHC301,a relative-humidity (RH) controller that uses wet and dry bulb temperatures to measure and display RH. A superior version of RHC201, it can apply a maximum or minimum function on RH as well as calculate dew point temperature. It receives two 4 - 20 mA or RTD inputs for wet and dry bulb temperatures within the range of -20 to 100 °C. The RH controller has a large two-color triple LED display to indicate a large variety of parameters. The upper display can indicate the calculated RH, peak RH (maximum) or valley RH (minimum). The middle can indicate dry bulb temperature or setpoint, while the lower can indicate wet bulb temperature, dew point temperature or the difference between dry and wet bulb temperatures. 15 additional LEDs indicate relay status, the process or measured value displayed, temperature units used (Celsius or Fahrenheit) and communication status. Operators program up to 4 setpoints easily via membrane buttons on the front of RHC301. The controller has an accuracy of ± 2 RH with a Class A Pt100 RTD and ± 0.5 RH for linear input. RHC301’s electromagnetic relays trigger humidification (heating), dehumidification (cooling), or any of six alarms - full-scale high and low, deviation high and low, inband and outband. Relays can be assigned to RH, Tdry, Twet, Tdew, Tdiff, water alarm or sensor fail. It transmits two isolated output signals which can be RH, Tdry, Twet, Tdew or Tdiff to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. RHC301 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. By including input terminals in the excitation loop, RHC301 provides a 24 V DC power supply for two-wire 4-20 transmitters.

Specifications

• 2 x 4 - 20 mA or RTD inputs for dry and wet temperatures
• Max, Min functions for RH
• 2 or 4 setpoints for RH / Tdry / Twet / Tdew / Tdiff / Water alarm / Sensor fail
• 85 - 265 V AC or 20 - 35 V DC supply
• 24 V DC transmitter supply
• RS485/MODBUS RTU
• 2 x Isolated 0/4 - 20 mA or 0 - 10 V DC retransmission outputs corresponding to RH / Tdry /Twet / Tdew / Tdiff
• Water alarm annunciator
• Dew point temperature

Additional Information:

• Item Code: RHC301

Product Price :Get Latest Price

• Our Humidity and Temperature Controller, HTC96 is a ON-OFF controller designed for relative humidity & temperature control applications with a humidity range from 0 to 100% RH and a temperature range of -20 to 100° C. 
• It receives input from Radix's SHT40(duct-mount) RH+T sensors and SHT20, SHT30 (wall-mount) which must be ordered separately and may be placed up to 50 meters from the unit. .
• Operators program up to 2 set points via membrane buttons on the front of HTC96. 
• This controller has an accuracy of ± 2% RH and ± 0.3° C. HTC96's electromagnetic relays trigger full-scale Hi and Lo alarms. 
• It transmits one isolated output signal (either temperature or humidity) to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). 
• signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. 
• Our Humidity / Temperature Controller features Radix's proprietary sensor-break indication technology.

• RH and T inputs from sensors
• Accuracy: ± 2% RH, ± 0.3° C
• Up to 2 set points for temperature and humidity
• Isolated retransmission output for temperature and humidity
• 85 - 265 V AC SMPS
• User programmable
• Sensor-break indication

Additional Information:

• Item Code: HTC96

Product Price :Get Latest Price

• Temperature Indicator and Controller, HX96A is a ON-OFF controller designed for relative humidity and temperature control applications with a humidity range from 0 to 100% RH and a temperature range of -20 to 100 °C. 
• It receives input from Radix's SHT40(duct-mount) RH+T sensors and SHT20, SHT30 (wall-mount) which must be ordered separately and may be placed up to 50 meters from the unit HX96A features a two-color dual LED display; the upper indicates relative humidity and the lower, temperature while eight additional LEDs indicate communication status and the status of each relay. Operators program up to 4 set points via membrane buttons on the front of HX96A. 
• This controller has an accuracy of ±2% RH and ± 0.3° C. HX96A's 4 electromagnetic relays trigger heating, cooling and full-scale Hi and Lo alarms.
•  It transmits 2 isolated current or voltage output signals (either temperature or humidity) to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). 
• Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. 
• This product features Radix's proprietary sensor-break indication technology.

• Input: RH and T signals from sensor
• Accuracy: ± 2% RH, ± 0.3 °C
• 2 x isolated current or voltage outputs corresponding to T and/or RH
• Up to 4 set points corresponding to T or RH
• Sensor break indication
• 85-265 V AC SMPS or 20-35 V DC supply
• RS485/MODBUS RTU

Additional Information:

• Item Code: HX96A

Product Price :Get Latest Price

• Input: RH and T signals from sensor
• Accuracy: ± 2% RH, ± 0.3° C
• User programmable
• 85~265 V AC SMPS
• Isolated retransmission output corresponding to either temperature or humidity
• Sensor break indication

Additional Information:

• Item Code: HT20

Product Price :Get Latest Price

• 2 x 4-20 mA or RTD inputs for dry and wet temperatures
• Accuracy: ± 2 RH
• 2 set points for RH and dry bulb temperature
• Isolated 0/4-20 mA or 0-10 V DC retransmission outputs corresponding to RH
• 24 V DC transmitter supply
• RS485/MOD BUS RTU

Additional Information:

• Item Code: RHC201

Product Price :Get Latest Price

1. RADIX offers a state-of-the-art technology solution for Relative Humidity, Temperature and Differential Pressure monitoring especially used for Clean Room applications.
2.  Available in different categories as per costumer's requirement, such as LED, LCD and Real time clock display.

• Microcontroller based
• RH, Temperature & DP measurement
• Software programmable channel ranges, units & input types
• User programmable for 1,2 or 3 channel measurement
• 3-row, 0.8” (20.3 mm), large, bright LED display
• 3 programmable Alarms with visual annunciation
• 3 programmable Alarms with open collector outputs to
• operate external relays
• Real Time Clock with battery back-up
• Software calibration for all 3 channels
• Calibration history / schedule for validation
• RS485/MODBUS RTU multidrop communication for PLC,
• SCADA, etc.
• 24 VDC or 85~265 VAC SMPS supply
• Powerful, user-friendly SCADA available
• FDA 21CFR Part11 compliant SCADA version also
• Advanced digital RH+T sensor technology

Additional Information:

• Item Code: HAWKEYE

Product Price :Get Latest Price

• EC48 is a cost-effective programmable temperature controller. It accepts J-type (Iron/Constantan) and K-type (Chromel/Alumel) thermocouples as well as Pt100 RTD inputs. 
• A large LED dual-display on the front of the process controller shows the difference in values of the setpoint and process value while 2 additional LEDs indicate the status of each of the two relays.
•  Buttons on the front of EC48 allow operators to easily program up to 2 setpoints for the process value.
•  With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy.
•  Typically, readings have a maximum error of ± 1 °C. The controller has 2 electromagnetic relays that trigger heating or cooling. 
• EC48 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. This product features Radix's proprietary sensor-break indication technology.

Product Price :Get Latest Price

• HX96A is a ON-OFF controller designed for relative humidity and temperature control applications with a humidity range from 0 to 100% RH and a temperature range of -20 to 100 °C.It receives input from Radix's SHT30, SHT20 (wall-mount) and SHT40(duct-mount) RH+T sensors which must be ordered separately and may be placed up to 50 meters from the unit.
•  HX96A features a two-color dual LED display; the upper indicates relative humidity and the lower, temperature while eight additional LEDs indicate the status of each relay and communication status. Operators program up to 4 setpoints via membrane buttons on the front of HX96A. This controller has an accuracy of ± 2% RH and ± 0.3 °C. HX96A's 4 electromagnetic relays trigger heating, cooling and full-scale Hi and Lo alarms.
•  It transmits 2 isolated current or voltage output signals (either temperature or humidity) to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). 
• Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. This product features Radix's proprietary sensor-break indication technology.

Specifications:

• RH and T inputs from sensors
• Accuracy: ± 2% RH, ± 0.3 °C
• Up to 4 setpoints corresponding to T or RH
• 85 - 265 V AC SMPS or 20 - 35 V DC supply
• 2 x isolated current or voltage outputs corresponding to T and/or RH
• RS485/MODBUS RTU
• Sensor break indication

Additional Information:

• Item Code: HX96-A

Product Price :Get Latest Price

• X96A, an ON-OFF controller housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water. 
• This product is wall-mounted and designed for use in hazardous environments. It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100, Cu53 as well as other 3-wire RTD sensors, 0 - 50 mV & 4-20 mA or 0 - 20 mA linear inputs. Group 1 contains 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100 RTDs and 0/4-20 mA and 0-50 mV linear inputs. Group 2 contains 11 types of thermocouples (B, D, C, E, G, J, K, N, R, S, T), Pt100 and Cu53 RTDs, 0/4-20 mA and 0-50 mV linear inputs. 
• A large LED dual-display on the front of the controller shows the difference in values of the set point and process value while 10 additional LEDs indicate the state of each relay, set points and Auto/Manual status.
•  Operators to easily program up to 4 set points via membrane buttons on the front of X96A. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy.
• X96A's electromagnetic relays trigger heating, cooling or any of 6 types of alarms - full-scale high/low, deviation high/low, in band and out band.
•  It also retransmits an isolated 0/4-20 mA or 0-10 V DC output signal to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. 
• By including input terminals in the excitation loop, X96A provides power for 2-wire 4-20 mA transmitters.

• 2 x universal inputs
• Up to 4 set points
• 24 V DC transmitter supply
• 2 x Isolated retransmission outputs
• RS485 / MODBUS RTU
• 85-265 V AC SMPS
• ON-OFF control

Additional Information:

• Item Code: X96Agen

Product Price :Get Latest Price

• TC96 is a mid-range programmable temperature controller; feature-rich and cost-effective at the same time.It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100 3-wire RTD sensors and optionally, 0 - 10 V DC and 4/ 0 - 20 mA linear inputs.
•  A large LED dual-display on the front of the temperature controller shows the difference in values of the setpoint and process value while 2 additional LEDs indicate the status of each of the two relays.
•  Buttons on the front of TC96 allow operators to easily program up to 2 setpoints for the process value. With an error of only 0.1% of full-scale value, this is a temperature controller of superior accuracy.
•  TC96's electromagnetic relays trigger heating, cooling or full-scale high and low alarms.
•  It also retransmits an isolated output signal to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). .
• Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. 
• TC96 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. 
• This product features Radix's proprietary sensor-break indication technology.

• Manual Loader : type A, B or D
• Auto/Manual station : type C
• Isolated 4~20 mA output:85~265 V AC SMPS OR 20~35 V DC OR 24 V AC
• Accuracy : ± 1% typical
• Input : 4~20 mA, 0~1 K ohms
• Input fail indication

Additional Information:

• Item Code: TC96