Call 08048968342 83% Response Rate

Send Email

Flameproof & Weatherproof Products

Pioneers in the industry, we offer flp process controller, flameproof scanner, flameproof loop powered indicator, flameproof dual channel indicator with alarms, flameproof rate indicator and flameproof temperature controller from India.
FLP Process Controller

FLP Process Controller

Get Latest Price

Product Brochure

Product Details:
Voltage12 V DC
BrandRadix
ApplicationSequence Controllers
IP RatingIP68
Flameproof Programmable Controller
TEC302, a programmable temperature or process controller housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water.

It can be pipe-mounted or wall-mounted. TEC302 is factory-programmed to receive input from one of 3 input groups: Group 1, which has Pt100 RTDs (standard), Group 2, consisting of 4-20 mA, 0-20 mA and 0-10 V DC linear inputs or Group 3 which contains Pt100 RTDs, 8 types of thermocouples (B, E, J, K, N, R, S, T) as well as 0-20 mA and 4-20 mA linear inputs.

A large LED dual-display on the front of the controller shows the difference in values of the set point and process value while 1 additional LED indicate the status the single relay.

Buttons on the front of TEC302, accessible through the flameproof enclosure, allow operators to easily program 1 set point for the process value.

With an error of only 0.1% of full-scale value, this is a controller of superior accuracy.

TEC302''s electromagnetic relay triggers heating, cooling or full-scale high and low alarms.

It also retransmits an isolated output signal to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR).

Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal.

TEC302 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on & off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%.

This product features Radix''s proprietary sensor-break indication technology.

Features
  • 3 input group options
  • 1 set point
  • Functions: ONOFF and Time Proportional
  • Accuracy: ± 0.1% of full scale ± 1° C, typical
  • Sensor break indication
  • 85-265 V AC SMPS



Additional Information:

  • Item Code: TEC302
Get Best QuoteRequest A Callback
Flameproof Scanner

Flameproof Scanner

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Piece
ModelIsoscan - 16
BrandRadix
Isoscan - 16 Channel Temperature Scanner
  • ISOSCAN, a 16-channel scanner by Radix. It has 5 distinctive software versions for a wide variety applications that must be reviewed before selecting a model.
  • With up to 16 inputs and 16 outputs, ISOSCAN receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T) Pt100 RTD sensors and voltage or current (0-20 mA or 4-20 mA) linear input. 
  • Inputs can be selected on the front panel of the scanner without DIP reconfiguring for each channel, making it very easy to operate.
  •  Operators also programs set points and alarms on ISOSCAN via membrane keys on the front of the unit. Inputs may be grouped together to trigger a common alarm. 
  • ISOSCAN’s channel-scan time for all of the inputs is less than 1.6 seconds. 
  • The scanner indicates process value, set point value and channel scanned in three two-color LED displays. 32 additional LEDs indicates the status of 16 relays and 16 alarms.
  •  A secondary 2 x 16 character LCD facilitates programming of input type, range, grouping, etc. ISOSCAN’s 8 electromagnetic relays perform ON-OFF control - heating, cooling or cooling with compressor time delay and also trigger high, low, deviation high and low, in band and out band alarms. 
  • The scanner transmits 8 isolated current or voltage output signals to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR).
  •  Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. 

  • ISOSCAN process values and events are viewed on a SCADA, which supports up to 32 instruments, thousands of tags and offers control features such as data-retrieval, trend mapping, 2 levels of security, set-point and alarms programming amongst others. 
The scanner will store up to 10 years of information even when powered down with non-volatile memory. Radix also offers a 21CFR version for the pharmaceutical industry.
  • ISOSCAN is optionally available in an enclosure that is certified flameproof for gas groups I, IIA and IIB with IP55 rating; resistant to moderate levels of dust and water. ISOSCAN can be made in a vertical or horizontal configuration.

Specifications:

  • Up to 16 universal inputs/16 outputs
  • For Temperature, Pressure, Flow, Level, Humidity, Conductivity, etc.
  • Various Input (X)/Output (Y) combinations
    • X4Y0
    • X4Y8
    • X8Y4
    • X8Y16
    • X16Y16, etc.
  • 5 software versions: Indicator, Multi-set point, Grouping, etc.
  • Front panel selection and calibration
  • Input burn protection
  • 10 year Non-Volatile Memory storage
  • 3 key, 5 level programming
  • Setpoint and level locks
  • RS485 with MODBUS RTU
  • Powerful, flexible SCADA software available
  • FDA 21CFR SCADA version also
  • Optional Printer interface (no computer needed)
  • 85 - 265 V AC SMPS or 24 V DC supply


Additional Information:

  • Item Code: ISOSCAN
Get Best QuoteRequest A Callback
Flameproof Loop Powered Indicator

Flameproof Loop Powered Indicator

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Piece
SupplyNot required
MountingPipe / Wall
BrandRadix
ApplicationIndustrial
Display TypeDigital
Model Number/NamePLD40
Accuracy0.1%
MaterialIP66 FLP enclosure
Product TypeProgrammable Loop Powered LED Indicator
  • Flameproof enclosure
  • 4~20mA loop powered - no supply needed
  • Loop voltage drop < 5 volts
  • ± 0.1% of span (typical) accuracy
  • 14.2mm, 4 digit LED display
  • Linear/square root function
  • Span, zero, decimal point user settable
  • Software calibration - no trimpots
  • Certified IP66 enclosure IS/IEC:60079-1-2007 for Gas Group IIA & IIB
  • Microprocessor technology
  • PC programmable


Additional Information:

  • Item Code: PLD40A
Get Best QuoteRequest A Callback
FLAMEPROOF DUAL CHANNEL INDICATOR WITH ALARMS

FLAMEPROOF DUAL CHANNEL INDICATOR WITH ALARMS

Get Latest Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
AccuracyThermocouple +- 0.25% of FS +-1 DegreeC Pt100 +- 0.05% of FS +-1 DegreeC
BrandRadix
Country of OriginMade in India
Dimensions (in mm)352(H) x 190(W) x 170(D)
MountingWall mount
ModelNEX225
  •  Versions
  • - Indicator with alarms
  • - PID - Dual loop
  • - Heat+cool
  • - VMD
  •  2 x Universal input / RS485 input
  •  PID Control with Fuzzy Logic
  •  Flameproof, IP65
  •  Sampling time 50ms/200ms programmable
  •  Control outputs - User programmable between relays / analog output
  •  4/7 Setpoints for FLP/NON-FLP respectively
  •  Isolated 2 x 0/4~20 mA or 0-10 V DC for control / retransmission output
  •  Isolated RS485/MODBUS RTU
  •  Autotuning function
  •  Auto/manual control
  •  Calibration & configuration through PC utility
  •  User friendly keyboard interface with password protection
  •  User key with assignable function
Get Best QuoteRequest A Callback
Flameproof Rate Indicator

Flameproof Rate Indicator

Get Latest Price

Product Details:
BrandRadix
DimensionStandard
  • FRCT206 is a RPM indicator housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water.
  •  FRCT206 is a programmable RPM indicator typically used to measure motor and shaft speeds up to 5000 Hz. 
  • The rate-indicator accepts input from proximity switches, photoelectric switches, voltage pulses, limit switches, electromagnetic pickups amongst others.
  •  FRCT206 features a dual 6-digit programmable LED display, which indicates the measured process value and setpoint. Operators can program up to 2 setpoints and 2 alarms via membrane keys in the front of the unit.
  •  This rate-indicator can measure 0.06 - 9999 RPM within 0.05% of the reading. 
  • For even greater accuracy, FRCT206 can be programmed to take in multiple pulse-inputs over 1 rotation and display the correct value via a scaling calculation. 
  • The rate-indicator transmits 2 relay outputs as well as 1 isolated retransmission 4 - 20 mA output for process control or to a PLC/DCS.


Additional Information:

  • Item Code: RCT206Flameproof
Get Best QuoteRequest A Callback
Flameproof Temperature Controller

Flameproof Temperature Controller

Get Latest Price

Product Brochure

Product Details:
TypeDigital
TC96 - Universal input, 2 Set points, 96x96

TC96, a mid-range programmable temperature controller; feature-rich and cost-effective at the same time.It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100 3-wire RTD sensors and optionally, 0-10 V DC and 0-20 mA or 4 - 20 mA linear inputs. A large LED dual-display on the front of the temperature controller shows the difference in values of the set point and process value while 2 additional LEDs indicate the status of each of the two relays. Buttons on the front of TC96 allow operators to easily program up to 2 set points for the process value. With an error of only 0.1% of full-scale value, this is a temperature controller of superior accuracy. TC96''s electromagnetic relays trigger heating, cooling or full-scale high and low alarms. It also retransmits an isolated output signal to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. TC96 is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. This product features Radix''s proprietary sensor-break indication technology.

Specifications:

  • Universal input
  • Up to 2 set points
  • Accuracy: ± 0.1% of full scale, typically ±1 °C
  • Isolated 0/4-20 mA or 0-10 V DC retransmission output
  • ON-OFF and Time Proportional control
  • 85-265 V AC SMPS or 20-35 V DC or 24 V AC power supply
  • Sensor break indication


    Additional Information:

    • Item Code: TC96-Flameproof
    Get Best QuoteRequest A Callback
    Flameproof Temperature Indicator

    Flameproof Temperature Indicator

    Get Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    DimensionStandard
    BrandRadix
    Flameproof Programmable Indicator
    • TEC301, a programmable indicator housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water.
    •  It can be wall-mounted or pipe-mounted.
    • TEC301 is factory-programmed to receive input from one of 3 input groups: Group 1, which has Pt100 RTDs (standard), Group 2, consisting of 4-20 mA, 0-20 mA and 0-10 V DC linear inputs or Group 3 which contains Pt100 RTDs, 8 types of thermocouples (B, E, J, K, N, R, S, T) as well as 4-20 mA and 0-20 mA linear inputs.
    •  This programmable indicator features a large single LED display to indicate the process value. Operators easily program resolution, bias, high & low scale via membrane keys on the front of the unit accessible through the flameproof enclosure. 
    • TEC301 provides signal isolation between input and supply up to 1 KV AC/ 1minute.

    Specifications:
    • 3 input group options
    • Accuracy: ± 0.1% of full scale ± 1° C, typical
    • Sensor break indication
    • 85-265 V AC SMPS


    Additional Information:

    • Item Code: TEC301gen
    Get Best QuoteRequest A Callback
    Flameproof Temperature Transmitter

    Flameproof Temperature Transmitter

    Get Latest Price

    Product Brochure

    Product Details:
    Minimum Order Quantity1 Piece
    BrandRadix
    DimensionStandard
    ModelTX3DR
    TX3DR - Isolated, Universal input

    • TX3DR, a loop-powered isolated Temperature Transmitter mounted on a 35 mm DIN rail in a control panel.It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T); Pt200, Pt100 and Pt50 RTDs; and 4-20 mA and 0-50 mV linear input. 
    • Operators can calibrate ZERO and SPAN easily via membrane keys on the front of the temperature transmitter.
    •  TX3DR has a large 4-digit LED display on the front of the instrument to indicate the process value and facilitate programming. It is powered by a 11.5-32 V DC loop supply.
    •  TX3DR provides signal isolation between input and output of 1000 V AC RMS/1 minute and 250 V AC RMS/continuous. It’s output is selectable between 4-20 mA or 20-4mA.
    •  Programmable parameters on TX3DR include digital filter level, sensor break upscale and downscale limits, unit of measurement, output type and auto ranging, which must be specified by the user before ordering.
    •  Radix also provides a flameproof version of this temperature transmitter which is certified for gas groups I, IIA and IIB.

    Specifications:

    • Universal input
    • 0.1% linearisation accuracy
    • Software calibration - no trim pots
    • Upscale/downscale selection
    • 11.5-32 V DC loop supply
    • 4-20 mA or 20-4 mA selection
    • 4-digit LED display enhances utility


    Additional Information:

    • Item Code: TX3DR
    Get Best QuoteRequest A Callback
    FLP Indicator

    FLP Indicator

    Get Latest Price

    Product Brochure

    Product Details:
    Minimum Order Quantity1 Piece
    BrandRadix
    Flameproof Programmable Indicator

    • TEC301 is factory-programmed to receive input from one of 3 input groups: Group 1, which has Pt100 RTDs (standard), Group 2, consisting of 4-20 mA, 0-20 mA and 0-10 V DC linear inputs or Group 3 which contains Pt100 RTDs, 8 types of thermocouples (B, E, J, K, N, R, S, T) as well as 0-20 mA and 4-20 mA linear inputs. 
    • It can be pipe-mounted or wall-mounted. TEC301 is factory-programmed to receive input from one of 3 input groups: Group 1, which has Pt100 RTDs (standard), Group 2, consisting of 0-20 mA, 4-20 mA and 0-10 V DC linear inputs or Group 3 which contains Pt100 RTDs, 8 types of thermocouples (B, E, J, K, N, R, S, T) as well as 0-20 mA and 4-20 mA linear inputs. 
    • This programmable indicator features a large single LED display to indicate the process value. Operators easily program resolution, bias, high and low scale via membrane keys on the front of the unit accessible through the flameproof enclosure. 
    • TEC301 provides signal isolation between input and supply up to 1 KV AC/ 1 minute.

    • 3 input group options
    • Accuracy: ± 0.1% of full scale ± 1° C, typical
    • Sensor break indication
    • 85-265 V AC SMPS


      Additional Information:

      • Item Code: TEC301
      Get Best QuoteRequest A Callback

      EXPLORE MORE CATEGORIES

      Looking For "Flameproof & Weatherproof Products"?
      Thank youYour Enquiry has been sent successfully.
      © Radix Electrosystems Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.